Home > Video Transmitter And Receiver Module >

Latest COFDM MIMO Video Data Transmitter and Receiver Module Integrated TRX Systems

Product Categories

UAV Video Transmitter [11]
COFDM Transmitter [7]
Video Data Link [6]
Mesh Network Radio [10]
COFDM HD Transmitter [5]
COFDM Modulator [4]
Drone Video Transmitter [5]
UAV Data Link [4]
Video Transmitter And Receiver Module [9]
RF Power Amplifier [7]
FPV Video Scrambler [5]
COFDM Video Receiver [5]
Full Duplex Transceiver [5]

Hincn Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Latest COFDM MIMO Video Data Transmitter and Receiver Module Integrated TRX Systems

Ask Lasest Price
Brand Name :	Hincn
Model Number :	HCL5-M
Price :	US$899.00~US$3,299.00
Payment Terms :	,T/T,Western Union,D/P,D/A,L/C,MoneyGram
Supply Ability :	799 pcs/month
Delivery Time :	7~14 working days

Add to Cart

Product Details
Company Profile

Latest COFDM MIMO Video Data Transmitter and Receiver Module Integrated TRX Systems

Key Features

TDD COFDM video transmitter and receiver module for video data Link
RF Power: 25±2dBm+ external RF power amplifier
Working Frequency: 806~826HMz, 1428~1468MHz, 2402~2482MHz
Transparent IP Ethernet (2* Ethernet ports) and serial data(3* TTL/RS232 uart) sync telecommunication
Audio input and output with codec
Transmission range 5km~150km (UAV-to-ground) with/ without external RF power amplifier, can achieve wireless video data transmission at different levels of distance.
Great transfer rate for uplink and downlink

Overview

HCL5-M video data transmitter and receiver module was designed for wireless HD video transmission with dual wireless data links. This module works at 800MHz, 1.4GHz and 2.4GHz bands, the stability of signal transmission is ensured through the frequency hopping (FHSS) technology.

Specifications

Name	Latest COFDM MIMO Video Data Transmitter and Receiver Module Integrated TRX Systems
Modulation	TDD OFDM
Model number	HCL5-M
Frequency	806~826MHz, 1428~1468MHz, 2402~2482MHz
FHSS	Support
Bandwidths	1.4/3/5/10/20MHz
Throughput	Maximum 30Mbps@20MHz
RF Transmission Power	25±2 dBm+10W external power amplifier
Constellation	QPSK, 16QAM, 64QAM self adaption
Sensitivity	-106dBm (2.4GHz 1Mbps), -108dBm (1.4GHz 1Mbps), -108dBm (800MHz 1Mbps)
Ethernet ports	2 * Ethernet ports for IP data transmission
Serial ports	3 * RS232/3 * TTL for serial data transmission
Transmission Range	Up to 150km LOS (UAV-to-ground)
Management	Web UI and Control Uart
Encryption	AES128
Networking Mode	Point to Point, Point to Multipoint, Relay, Mesh
Power Consumption	<40W
Modem Dimensions	586413mm
Modem Weight	32g
Working Temp.	-20℃ ~ +65℃
Storage Temp.	-40℃ ~ +80℃

Input/Output Signal

Power in	XT30PW-M connector, DC in: 7~30V
Ethernet 1	4Pin ZH1.5mm connector
Ethernet 2	RJ45 connector
Data uart1	3PIN ZH1.5mm connector, TTL 3.3V
Data uart2 and uart3	6PIN PH1.25mm connector, uart3 works as control uart and data uart, TTL 3.3V
Audio input and output	4PIN PH1.25mm connector
USB	Micro USB connector, for software upgrading
Switch	TX/RX control signal for outside power amplifier
Main-Antenna	TX/RX antenna port, IPEX
Second-Antenna	RX antenna port, IPEX
12V out	On board 12V out (<150mA), for cool fan power supply
Power Led	Red, light on when normally powered
Node Led	Blue, light on when the module works as central node
Link Led	Light off - node not linked; Red - linked with weak signal; Orange - linked with medium signal; Green - linked with strong signal

HCL5-M100 Video Transmitter and Receiver Module

Close-up view of HCL5-M100 Module connectors

Wireless Networking with HCL5-M Module

The video data transmitter and receiver module supports two operating modes: Access Node or Central Node. It can be managed through Web UI or AT command via uart3. The module supports up to 16 Access Nodes connected to a Central Node, all sharing the maximum 30Mbps@20MHz throughput bandwidth. Uplink and downlink stream ratio can be controlled through web UI or AT command.

FAQ

Q: This video data transmitter and receiver module seems to support IP camera, what if I want to use a camera with HDMI or SDI video output?

A: For cameras with HDMI, SDI, AHD or AV output, you'll need our mini encoder device to encode the signal for transmission. At the receiver end, connect directly to your computer or NVR. For HDMI monitor output, our decoder device can convert the digital data back to HDMI video and audio signals.

Latest COFDM MIMO Video Data Transmitter and Receiver Module Integrated TRX Systems

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hincn Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Video Transmitter And Receiver Module products from this supplier

Find Similar Products By Category:

Hardware

Hot Searches: