Home > COFDM Video Receiver >

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

Product Categories

UAV Video Transmitter [11]
COFDM Transmitter [7]
Video Data Link [6]
Mesh Network Radio [10]
COFDM HD Transmitter [5]
COFDM Modulator [4]
Drone Video Transmitter [5]
UAV Data Link [4]
Video Transmitter And Receiver Module [9]
RF Power Amplifier [7]
FPV Video Scrambler [5]
COFDM Video Receiver [5]
Full Duplex Transceiver [5]

Hincn Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

Ask Lasest Price
Brand Name :	Hincn
Model Number :	HCT820-M+HD5
Price :	US$498.00~US$1785.00
Payment Terms :	,T/T,Western Union,MoneyGram,D/P,D/A,L/C
Delivery Time :	7~14 working days
Supply Ability :	600 sets/ month

Add to Cart

Product Details
Company Profile

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

H.265/ H.264 COFDM Transmitter Module With Low Latency And AES256 encryption

Key Features:

COFDM modulation
H265/H264 audio video encoding,maximum support 1080p/i @60fps real time video capture and encoding.
Support video input via HDMI + AV ports,two-channel video compression and transmission
AES256 encryption.
Support NLOS high-speed mobile transmission up to 800km/hour, suitable for UAV Drone video download links
Center frequency, wireless bandwidth, transmission stream, etc. can be configured.
Control by Web UI or serial port UART command

Transmitter Module Overview:

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

The COFDM transmitter module adopts COFDM modulation technology and H.265/H.264 encoding, achieving low latency video audio transmission in high-speed motion and NLOS (none line of sight) conditions. It is composed of two boards by flat cable (video codec encoder board and COFDM modulator board). It also provides one transparent transmission uart(unidirectional).

Technical Specifications:

H.265/ H.264 COFDM Transmitter Module With Low Latency And AES256 encryption
Input / Output interface
HD video input	HDMI,HDMI type A Connector
Composite video input	4PIN PH1.5mm connector(CVBS Analog Audio Video Input)
UART Data	3PIN 1.5mm pitch connector,default to be TTL3.3V level, standard RS232 level can also be optional before shipment.
UART Control	4PIN PH1.5mm connector,TTL3.3V.It can be connected to our Parameter Configure Board, and can also be connected to a PC or other host computer.
Power input	2PIN PH2.0mm connector (12V Power Supply)
RF output	IPEX
COFDM Wireless Modulation Transmission
Wireless modulation	COFDM(DVB-T)
IFFT mode	2K
Wireless bandwidth	1MHz~8MHz adjustable,1KHz step forward
FEC	1/2, 2/3, 3/4, 5/6, 7/8
Guard interval	1/32, 1/16, 1/8, 1/4
Constellation	QPSK, 16QAM, 64QAM
Wireless code stream	0.5Mbps to 31.67Mbps( bites per second)
RF
Frequency bands	200MHz~2300MHz(other bands can be supported with special manufacturing)
Tunning Step Size	1KHz
Power out	Configurable from -93dBm to -5dBm(subject to frequency)
Audio and video processing
Support video input	Default single-channel video input: HD or SD. Video input is automatically detected after power on. If connected at the same time, it defaults to the preferred HDMI input, and can also be changed to the preferred AV input. Optional dual video input simultaneous encoding and transmission.
Supported video formats	1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@ 50I, 1080@30I, 720@60P, 720@50P, 720@30P, …… 720480 60I(NTSC), 720576 50I(PAL)
Video encoding	H265/H264
Audio input	HDMI embedded audio or analog audio(Specify Mic in/Line in)
audio format	AAC, 16bit, stereo, 32Kbps
Encryption	AES256
Latency	H265:200~250 ms; H264: 50~130 ms
Monitoring and control	Comprehensive setup with our Config Panel or other device via control UART
Temperature Range
Full specification	0° to +70°C Ambient (Optional: -40° to +85°C )
Storage	–40° to +85°C
Dimensions
Size	704514mm(not including connectors out of the board)
Power requirements
Input range	7~24VDC
Power Consumption	<340mA@12V

The Transmitter Module can operate in different functional modes with different firmwares.The default normal function of of HCT820-M transmitter module will be paired our HD5 receiver module.

Difference between the HD5 and HD1 Receiver modules:

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

For the HD5 receiver module, the HD video latency from input of the transmitter to the HDMI screen displaying of the receiver is about 200ms to 250ms.

And for the HD1 receiver module, the latency is only about 130ms.

Product Tags:


*From:	Your email address is incorrect!
*To:	Hincn Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more COFDM Video Receiver products from this supplier

Find Similar Products By Category:

Hardware

Hot Searches:

Hincn Limited

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256

H.265 COFDM Video Receiver

Low Latency COFDM Video Receiver

AES256 rf rx tx module

H.265 H.264 COFDM Video Receiver RF RX TX Module Low Latency AES256